APU-Telescopic window reveal bead IDEAL-plus A30-plus

Die APU-Telescopic window reveal bead IDEAL-plus A30-plus

The APU telescopic window reveal bead IDEAL-plus is used indoor and outdoor plaster systems as specified by the latest APU selection criteria. Within the reveal the profile is stuck flush to the structural element there and after completion of the plastering work forms a clean and reliable termination of the plaster.

The profile comes with a self-adhesive PE foam tape, which ensures a watertight, lasting seal. A TPE protective lip protects the PE foam tape and forms a visually clean termination with the structural element. The integrated telescopic mechanism can absorb movements in any direction in the area around the joint. There is a fabric window reveal bead welded onto the profile. It provides added reliability for the interlocking within the plaster. There is a piece of self-adhesive tape on protective flap in order to secure the third-party protective film. This protects the window during the plastering work. After completion of these tasks, the protective flap is pulled off and what is created is a clean edge to the plaster.

Area of application A30 IDEAL-plus

With adhesive connection – only for surfaces suitable for being stuck to
Test of adhesion required

Window position

Within masonry

Window sizeup tp 10m²

Design

Telescopic window reveal bead IDEAL-plus, With flexible edge and protective lip 5,0 cm

A30-24plus

Length2.4 m

Packaging unit25 bars = 60 m

Weight (per PU)8 kg

Features


Material	Rigid PVC manufactured under DIN-16941 TPE manufactured under DIN-16941
Protective flap	Detachable with soft TPE connection and double-sided adhesive tape
Features	Telescopic bar with flexible TPE connection
Seal	PE foam tape 8 x 3 mm
Mesh	Min. 160 g/m2 approved for compound heat insulation systems 5 cm wide – MW 6 x 6 mm Ultrasonic welded

Important notes

Storage	Always store profiles laid down in a dry place.
Test of adhesion	Perform adhesion test.
Other applications	Any applications not clearly described in the documents may be implemented only after consultation with the plaster or ETICS manufacturer.