V82
Joint profile VHF-DROP-TEX12 mm, for curtain-type, rear-ventilated facades

Die APU-Joint profile for curtain-type, rear-ventilated facades, 12 mm V82

The APU joint profile VHF-DROP-TEX is used as a finish on the edge of the support panel for curtain-type, rear-ventilated façades. In conjunction with the joint profile VHF-PRO-TEX (V83), the field boundary joint is thus formed horizontally and vertically and a clean plaster edge with shadow gap is created.

The profile is equipped with a punched plaster bar. A fabric strip is welded to the web. Each bar has a one-sided fabric overhang of 10 cm in the longitudinal direction. The rear leg is pre-tensioned for better hold. After completion of the plastering work, a clean plaster finish is created.

Design

Joint profile VHF-DROP-TEX 12 mm, for curtain-type, rear-ventilated facades
V82-2012
Length2.0 m
Packaging unit25 bars = 50 m
Weight (per PU)8.5 kg

Features

 
Material
  • Rigid PVC manufactured under DIN-16941
Mesh
  • Min. 160 g/m2 approved for compound heat insulation systems
  • 12.5 cm wide – MW 4x4mm
  • Ultrasonic welded

Important notes

StorageAlways store profiles laid down in a dry place.
Other applicationsAny applications not clearly described in the documents may be implemented only after consultation with the plaster or ETICS manufacturer.
Joint width The joint width must be adjusted to the expected deformation.

Details

Sectional drawing in mm

 

Application drawing

Add to watchlist Download product sheet Download processing instructions

Your watchlist is empty