W40-3
Drip bead DROP-TEX-TREWith transparent drip edge and 2 x 12.5 cm mesh

Die APU-Drip bead DROP-TEX-TRE W40-3

The APU drip bead DROP-TEX-TRE is used horizontally in compound heat insulation sys- tems for recessed building elements, such as window and door jambs. The cranked profile contour with its transparent drip edge provides a reliable solution in respect of downward guidance of water.

The profile has two punched plaster bars. Welded onto every bar is a fabric strip. Each bar has a fabric overhang on one side of 10cm in the lengthways direction. To improve plaster take-up, the surfaces of the plaster edges are grooved.

Design

Drip bead DROP-TEX-TRE, With transparent drip edge and 2 x 12.5 cm mesh
W40-3-2000
Length2.0 m
Packaging unit25 bars = 50 m
Weight (per PU)8.3 kg

Features

 
Material
  • Rigid PVC manufactured under DIN-16941
Mesh
  • Min. 160 g/m2 approved for compound heat insulation systems
  • 2 x 12.5 cm wide – MW 4 x 4 mm
  • Ultrasonic welded
Accessories
  • Z13-0000 Plug connectors (1 bag)

Important notes

StorageAlways store profiles laid down in a dry place.
Other applicationsAny applications not clearly described in the documents may be implemented only after consultation with the plaster or ETICS manufacturer.

Details

Sectional drawing in mm

 

Application drawing

Your watchlist is empty