W80-20
Clip-on profile for plaster-base boards20 mm, with drip edge and mesh 12.5 cm

Die APU-Clip-on profile for plaster-base boards, 20 mm W80-20

The APU clip-on profile for plaster-base boards (10 mm, 12 mm, 15 mm and 20 mm) is used horizontally in compound heat insulation systems, e.g., where plaster abuts with the cases of roller shutters or of external Venetian blinds. The cranked profile contour provides a reliable solution in respect of downward guidance of water.

The profile has a punched plaster bar. Welded onto the bar is a fabric strip. Each bar has a fabric overhang on one side of c. 10cm in the lengthways direction. For the fixing to the plaster-base board there is a strip of PE foam tape on the inside on the bottom bar. For improved hold, the front and rear limbs are pre-tensioned. The included plug connectors (Z13) enable the profiles to be joined and fitted very precisely. What is created after completion of the plastering work is a clean termination of the plaster.

Design

Clip-on profile for plaster-base boards, With drip edge and 12.5 cm mesh
W80-202020 mm
Length2.0 m
Packaging unit25 bars = 50 m
Weight (per PU)8.6 kg

Features

 
Material
  • Rigid PVC manufactured under DIN-16941
Fixation
  • PE foam tape 7 x 1 mm
Mesh
  • Min. 160 g/m2 approved for compound heat insulation systems 12.5 cm wide – MW 4x4mm
  • Ultrasonic welded
Accessories
  • Z13-0000 Plug connectors (1 bag)

Important notes

StorageAlways store profiles laid down in a dry place.
Other applicationsAny applications not clearly described in the documents may be implemented only after consultation with the plaster or ETICS manufacturer.

Details

Sectional drawing in mm

 

Application drawing

Your watchlist is empty