APU-Expansion joint profile PUR-FIX W59

Die APU-Expansion joint profile PUR-FIX W59

The APU expansion joint profile PUR-FIX is used in compound heat insulation systems at vertical building joints. For the flush formation of a clean plaster edge, the profile can be fitted both in flat surfaces and inner corners.

The profile is made up of 2 plastic profiles, to each of which a strip of mesh is welded. There are two PUR sealing strips between the two profiles that decompress on removing the red activation tab and form a movable and watertight connection even in driving rain. The PUR sealing strips are impacted lengthways in the profiles and have an overhang. When forming the butt joint this creates a secure seal. The profile’s textile edges are flexi- bly connected, so it can be used on flat surfaces and inner corners. After completion of the plastering work and removal of the protective and activation tab, a clean plaster division is produced.

Design

expansion joint profile PUR-FIX, With 12.5 cm mesh

W59-2000

Length2.0 m

Packaging unit10 bars = 20 m

Weight (per PU)4.5 kg

Features


Material	Rigid PVC manufactured under DIN-16941
Protective flap	Detachable with soft TPE connection and double-sided adhesive tape
Fixation	Plastic nails Z21 (optional)
Seal	2 PUR sealing strips, 10 mm, type BG1 Watertight for joints of c. 12 mm (stretchable by c. 8 mm, compressible by c. 4 mm)
Mesh	Min. 160 g/m2 approved for compound heat insulation systems 2 x 12.5 cm wide – MW 4 x 4 mm Ultrasonic welded
Accessories	Z19-0000 Plug connectors (1 bag)
Optional accessories	Z21 plastic nails

Important notes

Storage	Always store profiles laid down in a dry place.
Other applications	Any applications not clearly described in the documents may be implemented only after consultation with the plaster or ETICS manufacturer.