W61-2
Base rail SOLI-TEX-DUEIncl. clip-on profile, cranked design

Die APU-Base rail SOLI-TEX-DUE W61-2

The APU base rail SOLI-TEX-DUE is used in compound heat insulation systems as the bottom termination of the wall insulation. The base rail is available in a variety of projection lengths. (Insulation material thickness 50, 60, 80, 100, 120, 140 and 160 mm). Where the insulating material is relatively thick, the extension rail can be used to extend the SOLI-TEX (Z63) base rail by 40 mm to 240 mm. The clip-on profile DUE forms an exact plaster edge.

The base rail SOLI-TEX-DUE consists of the SOLI-TEX base rail (S61) and the DUE clip- on profile (W62 - 2). The clip-on profile is clipped onto the base rail. The profile’s cranked contour ensures that water is accurately led away. There is a fabric window reveal bead welded onto the profile. Each bar has a fabric overhang on one side of 10cm in the length- ways direction. The included plug connectors (Z13), butt connectors (Z61) and inner and outer corners (Z18-2) enable the profiles to be joined and fitted very precisely. What is created after completion of the plastering work is a clean termination of the plaster.

Design

Base rail SOLI-TEX-DUE, Incl. clip-on profile, cranked design
W61-2-200550 mm
Length2.0 m
Packaging unit10 bars = 20 m
Weight (per PU)11.8 kg
W61-2-200660 mm
Length2.0 m
Packaging unit10 bars = 20 m
Weight (per PU)13.3 kg
W61-2-200880 mm
Length2.0 m
Packaging unit10 bars = 20 m
Weight (per PU)14.4 kg
W61-2-2010100 mm
Length2.0 m
Packaging unit10 bars = 20 m
Weight (per PU)16.0 kg
W61-2-2012120 mm
Length2.0 m
Packaging unit10 bars = 20 m
Weight (per PU)16.7 kg
W61-2-2014140 mm
Length2.0 m
Packaging unit10 bars = 20 m
Weight (per PU)17.5 kg
W61-2-2016160 mm
Length2.0 m
Packaging unit10 bars = 20 m
Weight (per PU)20.0 kg

Features

 
Material
  • Rigid PVC manufactured under DIN 16941
Features
  • S61-20.. SOLI-TEX base rail 2.0 m
  • W62-2-2100 SOLI-TEX-DUE clip-on profile 2.1 m
Mesh
  • Min. 160 g/m2 approved for compound heat insulation systems 12.5 cm wide – MW 4x4mm
  • Ultrasonic welded
Accessories
  • Z61-0000 Butt connectors (1-2 bars depending on projection) Z13-0000 Plug connectors (1 bag)
  • Z18-2-1010i Internal corners (1 piece)
  • Z18-2-1010a External corners (2 pieces)
Optional accessories
  • Z63-2004 SOLI-TEX Extension rail, 40 mm
Inspections
  • Munich Research Institute for Heat Insulation Heat Transmission Coefficient Test Report

Important notes

StorageStorage Always store profiles laid down in a dry place.
Other applicationsAny applications not clearly described in the documents may be implemented only after consultation with the plaster or ETICS manufacturer.

Details

Sectional drawing in mm

 

Application drawing

Your watchlist

Base rail SOLI-TEX-DUE Base rail SOLI-TEX-DUE