W62-2
Clip-on profile DUEWith cranked drip edge and 12.5 cm mesh

Die APU-Clip-on profile DUE W62-2

The APU clip-on profile DUE is used horizontally in compound heat insulation systems e.g., for plaster joints up against shutter boxes or in the base area. The cranked profile contour provides a reliable solution in respect of downward guidance of water.

The profile has a punched plaster bar. Welded onto the plaster limb is a fabric strip. Each bar has a fabric overhang on one side of 10cm in the lengthways direction. The bottom U-bar is used for perfectly fitting attachment to the existing structural element. The included plug connectors (Z13) and inner and outer corners (Z18 - 2) enable the profiles to be joined and fitted very precisely. What is created after completion of the plastering work is a clean termination of the plaster.

Design

Clip-on profile DUE, With cranked drip edge and 12.5 cm mesh
W62-2-2100
Length2.1 m
Packaging unit10 bars = 21 m
Weight (per PU)4.1 kg

Features

 
Material
  • Rigid PVC manufactured under DIN-16941
Mesh
  • Min. 160 g/m2 approved for compound heat insulation systems 12.5 cm wide – MW 4x4mm
  • Ultrasonic welded
Accessories
  • Z13-0000 Plug connectors (1 bag)
  • Z18-2-1010i Internal corners (2 pieces)
  • Z18-2-1010a External corners (4 pieces)

Important notes

StorageStorage Always store profiles laid down in a dry place.
Other applicationsAny applications not clearly described in the documents may be implemented only after consultation with the plaster or ETICS manufacturer.

Details

Sectional drawing in mm

 
 

 

Add to watchlist Download product sheet Download processing instructions Download audit report thermal testing

Your watchlist

Continue to sample order
W62-2
Clip-on profile DUE Clip-on profile DUE