W60-0
Stick-on profile ZEROWith drip edge and 12.5 cm mesh

Die APU-Stick-on profile ZERO W60-0

The APU stick-on profile ZERO is used horizontally in compound heat insulation systems e.g., for plaster joints up against shutter boxes. The profile contour with visible drip edge provides a reliable solution in respect of downward guidance of water.

The profile has a punched plaster bar. Welded onto the plaster limb is a fabric strip. Each bar has a fabric overhang on one side of 10cm in the lengthways direction. The lower limb is fitted with PE foam tape for sticking the profile to the respective surface. The included plug connectors (Z13) and inner and outer corners (Z18 - 0) enable the profiles to be joined and fitted very precisely. What is created after completion of the plastering work is a clean termination of the plaster.

Design

Stick-on profile ZERO, With drip edge and 12.5 cm mesh
W60-0-2100
Length2.1 m
Packaging unit10 bars = 21 m
Weight (per PU)3.4 kg

Features

 
Material
  • Rigid PVC manufactured under DIN-16941
Features
  • PE foam tape 14 x 3 mm
Mesh
  • Min. 160 g/m2 approved for compound heat insulation systems 12.5 cm wide – MW 4x4mm
  • Ultrasonic welded
Accessories
  • Z13-0000 Plug connectors (1 bag)
  • Z18-0-1010i Internal corners (2 pieces)
  • Z18-0-1010a External corners (4 pieces)

Important notes

StorageAlways store profiles laid down in a dry place.
Other applicationsAny applications not clearly described in the documents may be implemented only after consultation with the plaster or ETICS manufacturer.

Details

Sectional drawing in mm

 

Application drawing

Add to watchlist Download product sheet Download processing instructions

Your watchlist is empty