W62-0
Clip-on profile ZEROWith drip edge and 12.5 cm mesh

Die APU-Clip-on profile ZERO W62-0

The APU clip-on profile ZERO is used horizontally in compound heat insulation systems e.g., for plaster joints up against shutter boxes or in the base area. The profile contour with visible drip edge provides a reliable solution in respect of down- ward guidance of water.

The profile has a punched plaster bar. Welded onto the plaster limb is a fabric strip. Each bar has a fabric overhang on one side of 10cm in the lengthways direction. The bottom U-bar is used for perfectly fitting attachment to the existing structural element. The included plug connectors (Z13) and inner and outer corners (Z18 - 0) enable the profiles to be joined and fitted very precisely. What is created after completion of the plastering work is a clean termination of the plaster.

Design

Clip-on profile ZERO, With drip edge and 12.5 cm mesh
W62-0-2100
Length2.1 m
Packaging unit10 bars = 21 m
Weight (per PU)3.9 kg

Features

 
Material
  • Rigid PVC manufactured under DIN-16941
Mesh
  • Min. 160 g/m2 approved for compound heat insulation systems 12.5 cm wide – MW 4x4mm
  • Ultrasonic welded
Accessories
  • Z13-0000 Plug connectors (1 bag)
  • Z18-0-1010i Internal corners (2 pieces)
  • Z18-0-1010a External corners (4 pieces)

Important notes

StorageAlways store profiles laid down in a dry place.
Other applicationsAny applications not clearly described in the documents may be implemented only after consultation with the plaster or ETICS manufacturer.

Details

Sectional drawing in mm

 

Application drawing

Your watchlist

Clip-on profile ZERO Clip-on profile ZERO